Hochiki America Corporation

Products

Analog:

Alarm Control Panel
Alarm C.P. Acc.
Sensors
Analog Ducts
Bases
VoiceNET
Modules
Power Supplies
Pull Stations
Accessories

» Alarm Control Panel

click to enlarge view

FireNET Plus
Analog Addressable Fire Alarm Control Panel

Data Sheet | Instructions

STANDARD FEATURES

Analog design using Hochiki's advanced DCP protocol for fast communication
Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
Uses standard wire, no-shielded or twisted pair required on SLC loops
Integrated digital alarm communicator (DACT) with Contact ID and SIA reporting formats
Programmable sensitivity levels by device
Alarm Verification feature
Automatic daily calibration & drift compensation routine
Large 8-line x 40-character LCD display (320 char.)
1 or 2 loop (option)
RS-485 bus for panel network (option)
Built-in RS-232 interface for programming via a PC
3 on board programmable Form C relays rated at 1 amp at 30VDC
2 auxiliary power outputs, each rated 360mA at 24 VDC
Loop Explorer Windows® configuration utility
Auto-learn feature
500 network wide software zones
Network Capability of up to 64 panels (option)
Built in help and alarm information screens
2 on-board Class B (style Y) NAC circuits rated at 2.3 amps each (Special Application) and 1.6 amps each (Regulated continuous)
Gentex, System Sensor, Wheelock, and Amseco NAC sync protocol built-in
Automatic day/night sensitivity modes
Fire Drill test function
Walk Test function
Powerful & versatile Cause & Effect wizard including:
- Cause & Effect action
- Disable function configuration
- Test mode configuration

click to enlarge view

FireNET Denver Door
Analog Addressable Fire Alarm Control Panel with Plexiglass Window

Data Sheet | Instructions

STANDARD FEATURES

Analog design using Hochiki's advanced DCP protocol for fast and robust communication
UL 864 9th edition Listed
Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
Uses standard wire, no shielded or twisted pair required on SLC loops
Supports Class B (style 4) and Class A (style 6 or 7) SLC loops
4 on board Class B (style Y) NAC circuits rated at 2.5 Amps each
Programmable sensitivity levels per device & automatic day/ night sensitivity modes
Automatic daily calibration & drift compensation routine
Large 8-line x 40-character LCD display (320 char.)
2 or 4 loop versions (800 addresses/sub-addr. max.)
Dual RS-485 bus for panel network
2 built-in RS-232 interfaces for programming via a PC and serial printer interface
5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)
500mA of auxiliary power available rated at 24 VDC
Loop Explorer Windows® configuration utility
500 network wide software zones
Network Capability of up to 64 panels
RS485 slave bus for expansion - up to 32 FN-4127-IO boards or up to 15 FN-LCD-S serial annunciators and up to 17 FN-4127-IO boards
Auto-learn feature
Built in help and alarm information screens
Fire Drill test function
Walk Test function
Alarm Verification feature
FireNET is UL listed for Central Station Service, Remote Station Service and Proprietary Service
Operates on 120VAC or 240VAC input voltage
Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including: Cause & Effect action, Disable function configuration, Test mode configuration

click to enlarge view

FireNET (9th Edition)
Analog Addressable Fire Alarm Control Panel

Data Sheet | Instructions

STANDARD FEATURES

UL 864 9th edition approved
Analog design using Hochiki\'s advanced DCP protocol for fast and robust communication
Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
Uses standard wire, no shielded or twisted pair required on SLC loops
Supports Class B (style 4) and Class A (style 6 or 7) SLC loops
4 on board Class B (style Y) NAC circuits rated at 2.5 Amp each
Programmable sensitivity levels per device & automatic day/night sensitivity modes
Automatic daily calibration & drift compensation routine
Large 8-line x 40-character LCD display (320 char.)
2 or 4 loop versions (800 addresses/sub-addr. max.)
Dual RS-485 bus for panel network
2 built-in RS-232 interfaces for programming via a PC and serial printer interface
5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)
500mA of auxiliary power available rated at 24 VDC
Loop Explorer Windows® configuration utility
*500 network wide software zones
Network Capability of up to 64 panels
RS485 slave bus for expansion - up to 32 FN-4127-IO boards or up to 15 FN-LCD-S serial annunciators and up to 16 FN-4127-IO boards
Auto-learn feature
Built in help and alarm information screens
Fire Drill test function
Walk Test function
Alarm Verification feature
FireNET is UL listed for Central Station Service when used with the Bosch D9068 contact dialer
Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including: *Cause & Effect action, *Disable function configuration, *Test mode configuration