| Analog » Power Supplies STANDARD FEATURES - Input 115VAC / 60Hz, 1.45 amp.
- 12VDC or 24VDC selectable output.
- Class 2 Rated power limited output.
- Input fuse rated @ 3.5 amp/250V.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
- AC fail supervision (form C contacts).
- Low battery supervision (form C contacts).
- Battery presence supervision (form C contacts).
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Maximum charge current .7 amp.
- Zero voltage drop when switched over to battery backup.
- AC input and DC output LED indicators.
- Accommodates up to two (2) 12VDC/7AH batteries.
- Power supply, enclosure, cam lock and battery leads.
STANDARD FEATURES - Input 115VAC / 60Hz, 1.45 amp.
- 12VDC or 24VDC selectable output.
- Single Class 2 Rated power limited output.
- Input fuse rated @ 3.5 amp/250V.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
- AC fail supervision (form C contacts).
- Low battery supervision (form C contacts).
- Battery presence supervision (form C contacts).
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Maximum charge current .7 amp.
- Zero voltage drop when switched over to battery backup.
- AC input and DC output LED indicators.
- Accommodates up to two (2) 12VDC/7AH batteries.
- Power supply, enclosure, cam lock and battery leads.
STANDARD FEATURES - Input 115VAC / 60Hz, 1.45 amp.
- 12VDC or 24VDC selectable output.
- Single Class 2 Rated power limited output.
- Input fuse rated @ 3.5 amp/250V.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
- AC fail supervision (form C contacts).
- Low battery supervision (form C contacts).
- Battery presence supervision (form C contacts).
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Maximum charge current .7 amp.
- Zero voltage drop when switched over to battery backup.
- AC input and DC output LED indicators.
- Accommodates up to two (2) 12VDC/7AH batteries.
- Power supply, enclosure, cam lock and battery leads.
STANDARD FEATURES - Input 115VAC / 60Hz, 4.4 amp.
- 24VDC output.
- Single non-power limited output.
- Input fuse rated @ 3.5 amp/250V.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
- AC fail supervision (form C contacts).
- Low battery supervision (form C contacts).
- Battery presence supervision (form C contacts).
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Maximum charge current 3.6 amp.
- Zero voltage drop when switched over to battery backup.
- AC input and DC output LED indicators.
- Accommodates up to two (2) 12VDC/7AH batteries.
- Power supply, enclosure, cam lock and battery leads.
| FN-642-ULADAPower Extenders |
STANDARD FEATURES - Two (2) Class A or two (2) Class B FACP inputs.
- Two (2) NC dry contact trigger inputs.
- Four (4) Class A or four (4) Class B indicating circuits.
- Two (2) Class B outputs may be paralleled for more power on an indicating circuit.
- One (1) Aux. Power Output @ 1 amp supply current (w/battery back up).
- One (1) Aux. Power Output @ 1 amp supply current (w/o battery back up)
- Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and unnecessary service calls. LEDs indicate a prior fault (short, open, ground) has occurred on one or more signaling circuit outputs.
- 2 wire Horn/Strobe Sync mode allows audible notification appliances (Horns) to be silenced while visual notification appliances (Strobes) continue to operate.
| FN-842-ULADAPower Extenders |
STANDARD FEATURES - Two (2) Class A or two (2) Class B FACP inputs.
- Two (2) NC dry contact trigger inputs.
- Four (4) Class A or four (4) Class B indicating circuits.
- Two (2) Class B outputs may be paralleled for more power on an indicating circuit.
- One (1) Aux. Power Output @ 1 amp supply current (w/battery back up).
- One (1) Aux. Power Output @ 1 amp supply current (w/o battery back up)
- Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and unnecessary service calls. LEDs indicate a prior fault (short, open, ground) has occurred on one or more signaling circuit outputs.
- 2 wire Horn/Strobe Sync mode allows audible notification appliances (Horns) to be silenced while visual notification appliances (Strobes) continue to operate.
| FN-1042-ULADAPower Extenders |
STANDARD FEATURES - Two (2) Class A or two (2) Class B FACP inputs.
- Two (2) NC dry contact trigger inputs.
- Four (4) Class A or four (4) Class B indicating circuits.
- Two (2) Class B outputs may be paralleled for more power on an indicating circuit.
- One (1) Aux. Power Output @ 1 amp supply current (w/battery back up).
- One (1) Aux. Power Output @ 1 amp supply current (w/o battery back up)
- Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and unnecessary service calls. LEDs indicate a prior fault (short, open, ground) has occurred on one or more signaling circuit outputs.
- 2 wire Horn/Strobe Sync mode allows audible notification appliances (Horns) to be silenced while visual notification appliances (Strobes) continue to operate.
|
![[Hochiki America Corporation]](/img/clear.gif)
![[Products]](/img/side/prods/analog_powersupplies.jpg)
![[Power Supply]](img/products/lg/FN-300-ULX_lg.jpg)
![[Power Supply]](img/products/lg/FN-400-ULX_lg.jpg)
![[Power Supply]](img/products/lg/FN-600-ULX_lg.jpg)
![[Power Supply]](img/products/lg/FN-1024-ULX_lg.jpg)
![[Power Extenders]](img/products/lg/FN-642-ULADA_lg.jpg)
![[Power Extenders]](img/products/lg/FN-842-ULADA_lg.jpg)
![[Power Extenders]](img/products/lg/FN-1042-ULADA_lg.jpg)