SEARCH:
   
[Products]

Analog:

Alarm Control Panel
Alarm C.P. Acc.
Sensors
Analog Ducts
Bases
VoiceNET
Modules
Power Supplies
Pull Stations
Accessories
Analog » Modules
[Class A Supervised Output Module]
click to enlarge view
DCP-SOM-A/AI
Class A Supervised Output Module
Data Sheet | Instructions
STANDARD FEATURES
  • Built-in SCI circuitry (SOM-AI only)
  • Flexible application
  • Quick response to emergency conditions
  • Operation parameters are maintained by the module, and individual communication with the control system during emergency conditions is not Required
  • Contacts are rated 2.0 Amps @ 24VDC
  • Programming is highly flexible providing 16 priority states plus zoning capability
  • Programmed device output is turned off, silenced, or programmed to output the selected pattern
  • UL 864 Listed
[Conventional Zone Module]
click to enlarge view
CZM
Conventional Zone Module
Data Sheet | Instructions
STANDARD FEATURES
  • Provides an address point for a zone of up to 25 conventional smoke detectors
  • Blinks green when polled. Latched on red (controlled by panel) when activated
  • Device address can also be programmed with a handheld programmer. Device Address- ranges from 1 to 127
  • Compatible with Class B (Style B) and Class A (Style D) wiring
  • Auxiliary power source provides power for the zone of detectors
[Dual Input Monitor Module]
click to enlarge view
DIMM
Dual Input Monitor Module
Data Sheet | Instructions
STANDARD FEATURES
  • Dual input contact monitor
  • Fast, reliable contact monitoring utilizing the Hochiki DCP (Digital Communications Protocol)
  • 127 devices can be used per DCP loop
  • Bi-colored indicating LED provides module status
  • Can be programmed to monitor Normally Open (NO) or Normally closed (NC) contacts
  • Operates on Class A or Class B SLC loop
  • Accepts up to 14 AWG wire
  • Mounts to 4
[Fast Response Contact Module]
click to enlarge view
FRCME-P
Fast Response Contact Module
Data Sheet | Instructions
STANDARD FEATURES
  • Single input contact monitor
  • Fast, reliable contact monitoring utilizing the Hochiki DCP (Digital Communications Protocol)
  • Two different mounting configurations
  • 127 devices can be used per DCP loop
  • Can be programmed to monitor Normally Open (NO) or Normally closed (NC) contacts
  • Operates on Class A or Class B SLC loop
  • UL listed UL 864
[Fast Response Contact Module]
click to enlarge view
FRCME-S
Fast Response Contact Module
Data Sheet | Instructions
STANDARD FEATURES
  • Single input contact monitor
  • Fast, reliable contact monitoring utilizing the Hochiki DCP (Digital Communications Protocol)
  • 127 devices can be used per DCP loop
  • Two different mounting configurations
  • Can be programmed to monitor Normally Open (NO) or Normally closed (NC) contacts
  • Operates on Class A or Class B SLC loop
  • Accepts up to 14 AWG wire
  • UL listed UL 864
[Fast Response Contact Module 4
click to enlarge view
FRCME-4
Fast Response Contact Module 4" Square Box
Data Sheet | Instructions
STANDARD FEATURES
  • Single input contact monitor
  • Fast, reliable contact monitoring utilizing the Hochiki DCP (Digital Communications Protocol)
  • Two different mounting configurations
  • 127 devices can be used per DCP loop
  • Bi-colored indicating LED provides module status
  • Can be programmed to monitor Normally Open (NO) or Normally closed (NC) contacts
  • Operates on Class A or Class B SLC loop
  • UL listed UL 864
[Short Circuit Isolator]
click to enlarge view
SCI
Short Circuit Isolator
Data Sheet | Instructions
STANDARD FEATURES
  • Can be placed at any location on SLC loop
  • Checks the line for short circuit at power up
  • If the line is normal, the relay will be turned on. If a line short is detected, the relay remains open
  • Indication of short circuit by a yellow LED
[Supervised Output Modules]
click to enlarge view
SOM
Supervised Output Modules
Data Sheet | Instructions
STANDARD FEATURES
  • Flexible application
  • Quick response to emergency conditions
  • Operation parameters are maintained by the module, and individual communication with the control system during emergency conditions is not required
  • Contacts are rated 2.0 Amps @ 30 VDC
  • Programming is highly flexible providing 16 priority states plus zoning capability
  • Output can be defined as continuous or up to 14 modulated output patterns(12 user defined) and can be programmed to be Silencable or Non-Silencable
  • Outputs are supervised for open or short conditions
  • Visible bi-colored LED is software controlled and can be programmed to blink red or green when polled. The LED can be latched on when activated
[Dual Relay Module]
click to enlarge view
R2M
Dual Relay Module
Data Sheet | Instructions
STANDARD FEATURES
  • Provides two independently configurable Form C contacts per address
  • Contacts are rated 1.0 Amps @ 30 VDC or 0.5 Amp @ 125 VAC
  • Visible Bi-colored LED is software controlled and can be programmed to blink red or green when polled. The LED can be latched on when activated
  • Programming is highly flexible providing 16 priority states plus zoning capability
© Hochiki America Corporation
7051 Village Drive, Suite 100
Buena Park, CA 90621-2268
(714) 522-2246
Site Map