Hochiki America Corporation

Products

» Notification Appliances

HEC
Low Frequency Evacuation Horn/Strobes

STANDARD FEATURES

Nominal Voltage 24 VDC (12 VDC available on HEH)
Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
Unit Dimensions: 5" high x 4.5" wide x 2.5" deep
Prewire Entire System, Then Install Your Signals
Super-Slide® Bracket - Ease of Supervision Testing
Checkmate® - Instant Voltage Verification
Lower installation and Operating Costs
Input Terminals 12 to 18 AWG
Switch Selection for High or Low dBA
Switch for Chime, Whoop, Mechanical and 2400Hz Tone
Switch for Continuous or Temporal 3 (not available on whoop tone)
Tamperproof Re-entrant Grill
Surface Mount with the HSB (Hochiki Surface Mount Box)
Synchronize Strobe and/or Horn by Using the Hochiki Synchronization Module (12 VDC product must use the AVSM Module)
Silence Horn While Strobes Remain Flashing
Wide Voltage Range 16-33 VDC or FWR
Faceplate available in red or off-white

HES
Low Frequency Evacuation Strobes

STANDARD FEATURES

Nominal Voltage 24 VDC (12 VDC available on HEH)
Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
Unit Dimensions: 5" high x 4.5" wide x 2.5" deep
Prewire Entire System, Then Install Your Signals
Super-Slide® Bracket - Ease of Supervision Testing
Checkmate® - Instant Voltage Verification
Lower installation and Operating Costs
Input Terminals 12 to 18 AWG
Switch Selection for High or Low dBA
Switch for Chime, Whoop, Mechanical and 2400Hz Tone
Switch for Continuous or Temporal 3 (not available on whoop tone)
Tamperproof Re-entrant Grill
Surface Mount with the HSB (Hochiki Surface Mount Box)
Synchronize Strobe and/or Horn by Using the Hochiki Synchronization Module (12 VDC product must use the AVSM Module)
Silence Horn While Strobes Remain Flashing
Wide Voltage Range 16-33 VDC or FWR
Faceplate available in red or off-white

HEH
Low Frequency Evacuation Horns

STANDARD FEATURES

Nominal Voltage 24 VDC (12 VDC available on HEH)
Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
Unit Dimensions: 5" high x 4.5" wide x 2.5" deep
Prewire Entire System, Then Install Your Signals
Super-Slide® Bracket - Ease of Supervision Testing
Checkmate® - Instant Voltage Verification
Lower installation and Operating Costs
Input Terminals 12 to 18 AWG
Switch Selection for High or Low dBA
Switch for Chime, Whoop, Mechanical and 2400Hz Tone
Switch for Continuous or Temporal 3 (not available on whoop tone)
Tamperproof Re-entrant Grill
Surface Mount with the HSB (Hochiki Surface Mount Box)
Synchronize Strobe and/or Horn by Using the Hochiki Synchronization Module (12 VDC product must use the AVSM Module)
Silence Horn While Strobes Remain Flashing
Wide Voltage Range 16-33 VDC or FWR
Faceplate available in red or off-white

HEC3
Selectable Candela Evacuation Horn/Strobes

STANDARD FEATURES

Nominal voltage 12VDC and 24VDC
24VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
12VDC units have field selectable candela options of 15, 30, 60, and 75 candela
HEH horn is available in 12VDC or 24VDC
Super-Slide® Bracket - Ease of Supervision Testing
Checkmate® - Instant Voltage Verification
Unit Dimensions: 5" high x 4.5" wide x 2.5" deep
Synchronize strobe and/or horn with Hochiki Series Control Module (12VDC product must use the AVSM Module)
Prewire entire system, then install signals
Lower installation and operating costs
Input terminals 12 to 18 AWG
Switch selection for high or low dBA
Switch for chime, whoop, mechanical and 2400Hz tone
Tamperproof re-entrant grill
Switch for continuous or temporal 3 (not available on whoop tone)
Surface mount with the HSB (Hochiki ceiling surface mount box)
Silence horn while strobes remain flashing
Wide voltage range 8-17.5VDC (12VDC units) 16-33VDC or FWR (24VDC units)
Faceplate available in red or off-white

HES3
Selectable Candela Evacuation Strobes

STANDARD FEATURES

Nominal voltage 12VDC and 24VDC
24VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
12VDC units have field selectable candela options of 15, 30, 60, and 75 candela
HEH horn is available in 12VDC or 24VDC
Super-Slide® Bracket - Ease of Supervision Testing
Checkmate® - Instant Voltage Verification
Unit Dimensions: 5" high x 4.5" wide x 2.5" deep
Synchronize strobe and/or horn with Hochiki Series Control Module (12VDC product must use the AVSM Module)
Prewire entire system, then install signals
Lower installation and operating costs
Input terminals 12 to 18 AWG
Switch selection for high or low dBA
Switch for chime, whoop, mechanical and 2400Hz tone
Tamperproof re-entrant grill
Switch for continuous or temporal 3 (not available on whoop tone)
Surface mount with the HSB (Hochiki ceiling surface mount box)
Silence horn while strobes remain flashing
Wide voltage range 8-17.5VDC (12VDC units) 16-33VDC or FWR (24VDC units)
Faceplate available in red or off-white

HEH3
Evacuation Horns

STANDARD FEATURES

Nominal voltage 12VDC and 24VDC
24VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
12VDC units have field selectable candela options of 15, 30, 60, and 75 candela
HEH horn is available in 12VDC or 24VDC
Super-Slide® Bracket - Ease of Supervision Testing
Checkmate® - Instant Voltage Verification
Unit Dimensions: 5" high x 4.5" wide x 2.5" deep
Synchronize strobe and/or horn with Hochiki Series Control Module (12VDC product must use the AVSM Module)
Prewire entire system, then install signals
Lower installation and operating costs
Input terminals 12 to 18 AWG
Switch selection for high or low dBA
Switch for chime, whoop, mechanical and 2400Hz tone
Tamperproof re-entrant grill
Switch for continuous or temporal 3 (not available on whoop tone)
Surface mount with the HSB (Hochiki ceiling surface mount box)
Silence horn while strobes remain flashing
Wide voltage range 8-17.5VDC (12VDC units) 16-33VDC or FWR (24VDC units)
Faceplate available in red or off-white

HCC
Selectable Ceiling Mount Horn/Strobes

STANDARD FEATURES

HCS
Selectable Ceiling Mount Strobes

STANDARD FEATURES